Calling this one done. Had a bunch of issues - mostly my fault plus some experiments that went south.
She's a tail sitter ( again my fault ) hence the blob of clay under the tail.
She's up on the shelf with my trainer squadron
What's on your work bench atm ?
Re: What's on your work bench atm ?
Thanks,
John
John
- Stikpusher
- Moderator
- Posts: 18946
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: What's on your work bench atm ?
Looks good with your trainer squadron John. Now you need a T-33 and T-38 up there to join the Squadron. Also a SNJ/T-6
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
Re: What's on your work bench atm ?
I don't have a T-33 so I'll have to go looking for that one. I have a T-38 in the stash and oddly enough the I put the T-6 on the bench last night.
This is my trainer list
In the stash
T-6 Texan
T-45C Goshawk
T-2C Buckeye
TF-9J Cougar
T-38 Talon
TA-4J
No one makes
T-37 Tweet
Complete
T-28B Trojan
T-34 Mentor
T-6 Texan II
BAE Hawk T Mk.1
This is my trainer list
In the stash
T-6 Texan
T-45C Goshawk
T-2C Buckeye
TF-9J Cougar
T-38 Talon
TA-4J
No one makes
T-37 Tweet
Complete
T-28B Trojan
T-34 Mentor
T-6 Texan II
BAE Hawk T Mk.1
Thanks,
John
John
- Medicman71
- Elite Member
- Posts: 9775
- Joined: Mon Apr 07, 2014 9:32 am
- Location: Houston, Tx
Re: What's on your work bench atm ?
Where'd you get the Texan II? I need one.
Mike
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Re: What's on your work bench atm ?
The kit is from IsraCast and was pretty nice.
Build thread is here: https://cs.finescale.com/fsm/modeling_s ... 76720.aspx
Build thread is here: https://cs.finescale.com/fsm/modeling_s ... 76720.aspx
Thanks,
John
John
- Stikpusher
- Moderator
- Posts: 18946
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: What's on your work bench atm ?
Well, the Monogram A-37 can be converted into the original T-37 with some surgery…
http://www.arcair.com/Gal2/1201-1300/Ga ... ey/00.shtm
http://www.arcair.com/Gal2/1201-1300/Ga ... ey/00.shtm
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
Re: What's on your work bench atm ?
I'll save that one for last
"Starting with a chain saw, then my old boy scout ax, and finally diminishing grades of sandpaper, I was able to alleviate the dilemma."
"Starting with a chain saw, then my old boy scout ax, and finally diminishing grades of sandpaper, I was able to alleviate the dilemma."
Thanks,
John
John
Re: What's on your work bench atm ?
After a successful Comet build, I start to be back in building mode.
A brief inventory of my half-ready, "almost ended on the shelf of doom, but wont happen" - projects
AZ Models Vought Kingfisher in 1:72
Revells V-1 in 1:32
Kinetics F-16A 1:48
Tamiyas F-4B Phantom 1:48
Goal to finish one of these before end of 2023
- Kari
A brief inventory of my half-ready, "almost ended on the shelf of doom, but wont happen" - projects
AZ Models Vought Kingfisher in 1:72
Revells V-1 in 1:32
Kinetics F-16A 1:48
Tamiyas F-4B Phantom 1:48
Goal to finish one of these before end of 2023
- Kari
---
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
Re: What's on your work bench atm ?
Apologies for being a bit quite over the holidays Gents, the old Mojo has been waxing an waning a lot recently. Sufficed to say I've canned both the F-111, EF-111A and F-14 builds - far too much work. The EF-111A got binned alas as I just wasn't happy with it.
I have got these on the go.
A little Westland Whirlwind - which is destined for RAF SAR markings.
A Zvezda Hurricane mk.II which is just awaiting the arrive of some SEAC decals. It's a superb kit this - all OOB except the Vokes filter.
And a little Landrover - I've scratched up the missing gearstick etc.
I hope you're all well!
Cheers!
I have got these on the go.
A little Westland Whirlwind - which is destined for RAF SAR markings.
A Zvezda Hurricane mk.II which is just awaiting the arrive of some SEAC decals. It's a superb kit this - all OOB except the Vokes filter.
And a little Landrover - I've scratched up the missing gearstick etc.
I hope you're all well!
Cheers!
Stuart Templeton 'I may not be good but I'm slow...'
My blog: https://stuartsscalemodels.blogspot.com/
My blog: https://stuartsscalemodels.blogspot.com/
Re: What's on your work bench atm ?
Nice, Stuart. Steering wheel is on the wrong side though.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..