Modelcrazy's bench production 2022

Show off your completed work! One or two pictures and a brief explanation. Let others have a quick look at your finished masterpieces!
User avatar
Stuart
Elite Member
Posts: 9572
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales
Contact:

Re: Modelcrazy's bench production 2021

Post by Stuart »

I think I may have a spare Spitfire canopy somewhere - if push comes to shove.

I can't put into words how I feel about this build. The detail and love and attention that have gone into it is something else - it's by far the best carrier build I think I've ever seen.
Stuart Templeton 'I may not be good but I'm slow...'

My blog: https://stuartsscalemodels.blogspot.com/
User avatar
Modelcrazy
Addicted Member
Posts: 1429
Joined: Sun Mar 19, 2017 12:01 pm
Location: Sherman texas

Re: Modelcrazy's bench production 2021

Post by Modelcrazy »

Thank you on both counts Stuart.
I certainly have put a lot of time and money into it. Over 1100 hours and probably that in $.
I'm not concerned about the Spit. I'll get it in the next day or two, or I may just find the clear sprue before that. I'll find it after to be sure.
Building a kit from your stash is like cutting the head off a Hydra, two more take it’s place.

Image

https://www.youtube.com/results?search_ ... obby+bench
User avatar
BlackSheep214
Elite Member
Posts: 10371
Joined: Sun Apr 06, 2014 8:47 pm

Re: Modelcrazy's bench production 2021

Post by BlackSheep214 »

And how many figurines is that again? :shocked: :shocked: :shocked: :wow: :wow: :wow:
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
Modelcrazy
Addicted Member
Posts: 1429
Joined: Sun Mar 19, 2017 12:01 pm
Location: Sherman texas

Re: Modelcrazy's bench production 2021

Post by Modelcrazy »

A little over 300. My Northstar set is stuck at the PO. I should get them today although I think I'll try to finish up the Spit and Helldiver this weekend then back to the figures.
I bought another Spit from HL at 40% off. It came to $6 and some change so it's cheaper than shipping if I were to get an AM canopy. Like I said, the missing parts will show up at some point then I'll have another Mk.1 Spit to build. I've only ever lost one part somewhere in the room and have never found it even after removing everything and replacing the flooring. All other "lost" parts eventually show up....except some very small PE.
Building a kit from your stash is like cutting the head off a Hydra, two more take it’s place.

Image

https://www.youtube.com/results?search_ ... obby+bench
User avatar
mostrich
Admin
Posts: 2895
Joined: Sun Apr 06, 2014 2:13 pm
Location: Hamburg, Germany
Contact:

Re: Modelcrazy's bench production 2021

Post by mostrich »

A very impressive bunch of figures. Nice work all around, too.
When the sun of culture hangs low even dwarfs throw shadows.
User avatar
Modelcrazy
Addicted Member
Posts: 1429
Joined: Sun Mar 19, 2017 12:01 pm
Location: Sherman texas

Re: Modelcrazy's bench production 2021

Post by Modelcrazy »

Thanks you Mostrich.
Some work on the Spit and Helldiver. I also received the guys from Northstar so I'll start painting them and begin placing all the crew I have completed on the deck.
The EagleCal decals I used for the Spit are nice, just a tad too thick. But the MicroSet I used seems to help. Maybe one more application.
I've gone and lost the prop for the Helldiver. :headbang: It can be the last thing to install so I have time to look for it, otherwise I suppose a prop from a Wildcat or something would work, if I can fine a sacrificial kit.

Image
Image
Image
Image
Building a kit from your stash is like cutting the head off a Hydra, two more take it’s place.

Image

https://www.youtube.com/results?search_ ... obby+bench
User avatar
Stuart
Elite Member
Posts: 9572
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales
Contact:

Re: Modelcrazy's bench production 2021

Post by Stuart »

Nice looking pair of builds there!
Stuart Templeton 'I may not be good but I'm slow...'

My blog: https://stuartsscalemodels.blogspot.com/
User avatar
tempestjohnny
Elite Member
Posts: 3334
Joined: Sat Oct 15, 2016 4:51 am
Location: Naples. FL

Re: Modelcrazy's bench production 2021

Post by tempestjohnny »

Steve if you can't find prop. I have a spare from the Hasegawa Dauntless. Would that work?
User avatar
Modelcrazy
Addicted Member
Posts: 1429
Joined: Sun Mar 19, 2017 12:01 pm
Location: Sherman texas

Re: Modelcrazy's bench production 2021

Post by Modelcrazy »

Possibly John.
I've been looking at my stash and the only one I can come up with is the Wildcat, which I want to build someday. I'm looking for inexpensive kits on eBay but just can't justify the cost for a propeller. If I can't find it by the time I complete it and stop looking I may just take you up on it. I have the upper wing on and neet to touch up the paint where the interplane struts attach but otherwise it's on to the decals. The gear on this is VERY delicate. No a bad kit for Heller though. Should go with the Sparrowhawk I did about 7 years ago.

Image
Building a kit from your stash is like cutting the head off a Hydra, two more take it’s place.

Image

https://www.youtube.com/results?search_ ... obby+bench
User avatar
Modelcrazy
Addicted Member
Posts: 1429
Joined: Sun Mar 19, 2017 12:01 pm
Location: Sherman texas

Re: Modelcrazy's bench production 2021

Post by Modelcrazy »

The Spits done.
Spitfire Mk.1 P9363 QV-K Flown by Sqn Ldr B Lane, OC No 19 Sqn, September 1940, Battle of Brittain. The aircraft survived the war with two different pilots.

P9386 QV-K was Struck of Charge 9 Feb 1945. Sqn Ldr Lane's Log Books are lodged with the Imperial War Museum London.

I put the pilot in because I was going to display her in the air first.

Image
Image
Image
Image
Image
Image
Image
Image
Building a kit from your stash is like cutting the head off a Hydra, two more take it’s place.

Image

https://www.youtube.com/results?search_ ... obby+bench
Post Reply

Return to “Member's Gallery”