Yes, and as a brush painter, I think you have a good understanding of the physical properties of the paint, which is important. One of the big adjustments you might have to make is the optimal paint/thinner ratio used when airbrushing. Whatever your airbrushing style is, the mix will be much thinner than what you are used to. Coverage is not as important since uniform coverage with an airbrush can be accomplished with multiple layers without sacrificing any smoothness of finish. I like to use this to my advantage and I favor highly thinned mixtures to (a) achieve a smooth finish and (b) have more control dialing in any pre-shade effects.Stikpusher wrote:Stuart, while there certainly is a learning curve with an airbrush, on basic paint schemes, it’s fairly easy to master them. Each airbrush has its own quirks to master, but you’ll find that many things are not as challenging as they may look or you think that they may be.Stuart wrote:lol! thanks chaps - although I suspect my AB work will be a lot less good than my brush work to begin with.
Airbrush recommendations...
Re: Airbrush recommendations...
John aka JKim
-----------<><
-----------<><
Re: Airbrush recommendations...
Good advice, thanks John, and thanks for the advice all.
The Neo has been ordered, and I'm getting some cash from the Mother in Law to buy a compressor, and hopefully some towards an extractor - I'm looking forward to it.
The Neo has been ordered, and I'm getting some cash from the Mother in Law to buy a compressor, and hopefully some towards an extractor - I'm looking forward to it.
Stuart Templeton 'I may not be good but I'm slow...'
My blog: https://stuartsscalemodels.blogspot.com/
My blog: https://stuartsscalemodels.blogspot.com/
Re: Airbrush recommendations...
What is an extractor?
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
- tempestjohnny
- Elite Member
- Posts: 3351
- Joined: Sat Oct 15, 2016 4:51 am
- Location: Naples. FL
Re: Airbrush recommendations...
Airbrush boothLyleW wrote: What is an extractor?
Re: Airbrush recommendations...
Okay. Those silly Brits.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
Re: Airbrush recommendations...
That's the one - something like this...
https://www.amazon.co.uk/Portable-Spray ... 86&sr=8-12
Any thoughts on compressors - I was thinking about a Sparmax one -
https://www.amazon.co.uk/Sparmax-TC610H ... 156&sr=8-9
Or just something like this - I'd like something quiet and portable (the C02 is a good idea, but I'm not sure about big gas bottles in the house.)
https://www.amazon.co.uk/Fengda-Profess ... 56&sr=8-21
https://www.amazon.co.uk/Portable-Spray ... 86&sr=8-12
Any thoughts on compressors - I was thinking about a Sparmax one -
https://www.amazon.co.uk/Sparmax-TC610H ... 156&sr=8-9
Or just something like this - I'd like something quiet and portable (the C02 is a good idea, but I'm not sure about big gas bottles in the house.)
https://www.amazon.co.uk/Fengda-Profess ... 56&sr=8-21
Stuart Templeton 'I may not be good but I'm slow...'
My blog: https://stuartsscalemodels.blogspot.com/
My blog: https://stuartsscalemodels.blogspot.com/
Re: Airbrush recommendations...
That style of booth is what many have. Looks almost like mine.
The 2nd compressor you listed will work fine. Very similar to mine and what a lot of folks use. The case is superfluous, though.
The 2nd compressor you listed will work fine. Very similar to mine and what a lot of folks use. The case is superfluous, though.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
Re: Airbrush recommendations...
There are some without the cases on amazon that are a bit cheaper, with the water trap and pressure adjustment. How loud is yours Lyle?
Stuart Templeton 'I may not be good but I'm slow...'
My blog: https://stuartsscalemodels.blogspot.com/
My blog: https://stuartsscalemodels.blogspot.com/
Re: Airbrush recommendations...
Mine came with the pressure valve and the water trap, I think. Maybe. Who knows? Over her, in the colonies, those are easy and cheap to get, though.
It is a bit loud, not deafening. It sits on a side bench about a meter-ish from me at the same level, so I am sure that contributes to the noise.
It is a bit loud, not deafening. It sits on a side bench about a meter-ish from me at the same level, so I am sure that contributes to the noise.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
- tempestjohnny
- Elite Member
- Posts: 3351
- Joined: Sat Oct 15, 2016 4:51 am
- Location: Naples. FL
Re: Airbrush recommendations...
The booth you linked is exactly like mine. Does what it should. The compressor looks to be a good one