Page 2 of 6
Re: A freshly hatched Viper from Moebius.
Posted: Sat Mar 09, 2024 10:48 pm
by Eagle-1
There is a "scoop" under the nose, so I fixed up the under nose scoop a little:
On a couple reference pictures, I see 4 holes. I like 'em, so I added 'em:
Rob.
Re: A freshly hatched Viper from Moebius.
Posted: Sat Mar 09, 2024 10:59 pm
by Eagle-1
Now, to the rear engine section. This are needed the most fixing so far and took a day or two.
I used this as reference:
With this, I added and/or modified numerous things on this rear because the original kit didn't have much and the studio reference showed alot.
One last look at the stock piece:
Quite a bit of detailing later:
Sticking it all back together one more time, here's how it's coming along!
Critique, comments, suggestions are always welcome!
Rob.
Re: A freshly hatched Viper from Moebius.
Posted: Sat Mar 09, 2024 11:08 pm
by Eagle-1
Re: A freshly hatched Viper from Moebius.
Posted: Sat Mar 09, 2024 11:12 pm
by Eagle-1
Next, we're moving on to these on either side. I probably should have done this before anything else because now, I'll have to crack the model back into two halves to get in the fuselage.
Again, breaking this egg!
What's there:
What I would like more of:
Rob.
Re: A freshly hatched Viper from Moebius.
Posted: Sun Mar 10, 2024 12:50 am
by Stikpusher
Re: A freshly hatched Viper from Moebius.
Posted: Sun Mar 10, 2024 2:33 am
by Eagle-1
Wrong Viper. Wrong show. Wrong year.
Try this one.
https://www.youtube.com/watch?v=4Eqq3B5s-mw
3:53
Rob.
Re: A freshly hatched Viper from Moebius.
Posted: Sun Mar 10, 2024 2:45 am
by Eagle-1
What you posted, as an aside note, is the BEST Viper!
Rob.
Re: A freshly hatched Viper from Moebius.
Posted: Sun Mar 10, 2024 10:31 am
by Stikpusher
I liked both shows… but I loved the launch controller on the original series…
Re: A freshly hatched Viper from Moebius.
Posted: Tue Mar 12, 2024 11:58 am
by Stuart
Re: A freshly hatched Viper from Moebius.
Posted: Tue Mar 12, 2024 1:08 pm
by Stikpusher
Your image doesn’t show up for me Stuart…
But this young lady (relatively speaking, as she was older than I was back then)